Excelite’s low profile swimming pool enclosure has a lifespan of at least 25 years. However, having one design all these years can be so boring. For this reason, you may desire to redesign the enclosure.

 

Low Profile Swimming Pool Enclosure

A low profile swimming pool enclosure

 

In this article, I will take you through a simple procedure, on how to go about this process. First, let’s begin by enumerating some of the reasons why this could be necessary.

 

Why redesign low profile swimming pool enclosure?

 

There are a number of reasons why you could be forced to redesign a pool enclosure. They include:

 

Comply with building code

 

In case of any revisions or amendments in the building and construction codes, you have no option but, comply. These amendments or revisions aim to improve safety of pool enclosures.

 

Low Profile Swimming Pool Enclosure - building codes

Building codes for a low profiled swimming pool enclosure

 

Therefore, you must be up-to-date with any changes in the industry. It is illegal not to improve your swimming pool enclosure to meet the current building standards.

 

Damaged pool enclosure

 

When you construct a low profile swimming pool enclosure with substandard material, it will definitely collapse. In such circumstances, you have no option but, to redesign your enclosure.

 

Low Profile Swimming Pool Enclosure - collapsed dome enclosure

A dome pool enclosure collapsed due to the use of substandard materials

 

Add comfort

 

This is where you want your low pool enclosure to be more comfortable. Maybe, you want to improve its heat retention capability. Therefore, you have no choice but, to install the solid polycarbonate swimming pool enclosure.

 

Update to give it a modern and fresher look

 

Maybe you still have the fixed swimming pool enclosures. It is now time to go for the telescopic swimming pool enclosures. You get the opportunity to have both outdoor and indoor experience.

 

Low Profile Swimming Pool Enclosure

Retractable swimming pool enclosure

 

You need extra space

 

Well, a low profile swimming pool enclosure could be too small. Thus, you may opt to install a high profile swimming pool enclosure for extra comfort. It gives you a room to install chairs and other items. It is easier to decorate a high profile swimming pool enclosure than low profile.

 

Planning to sell a property

 

Selling a property with a modern low profile swimming pool enclosure will fetch more money. This is a better option for real estate agents.

 

In short, these are some of the main reasons that can compel you to redesign your pool enclosure. In case your swimming pool enclosure meets this criteria, then you can go ahead and start the process.

 

So, how do you go about this process?

 

Redesigning low profile swimming pool enclosure

 

First, before you begin the process of redesigning the low profile swimming pool enclosure, you need to ask yourself these simple questions:

 

  1. What is the main reason for the redesigning process?
  2. Is there anything new I would like to include in my old design?
  3. How much will the entire process cost?
  4. Should I redesign a section or the entire low profile swimming pool enclosure?

 

With these in mind, you should be able to make the right decision as far as the design process is concerned.

 

Now, what should be your next process?

 

It will depend on whether you have a specific swimming pool enclosure design in mind or not. In case you don’t have a design in mind, you can contact our technical team. We shall design one for you.

 

This does not imply you throw away the old swimming pool enclosure. Don’t forget that a good pool enclosure should last for more than 25 years. So, this can still serve the same purpose as the new you intend to install.

 

Again, you must plan and budget for the entire process. Without this, it will be nearly impossible to achieve the intended objective of the process. I can assure you this – any pool enclosure construction process without a plan will definitely fail.

 

Redesign process (step-by-step)

 

I will make the low profile swimming pool enclosure redesign process simple for you to understand. So, here is what you need to do:

 

  1. Choose the right materials for the process

This is where the process begins. You should go for solid polycarbonate sheet and extruded aluminum rods. These are the only materials we trust.

 

swimming pool enclosure roof design

Swimming pool enclosure

 

A reason why all Excelite swimming pool enclosures are constructed from the two. Here are unique designs of our pool enclosures.

 

  1. Order for the new pool enclosures (a different design)

 

With a 30% down payment, your order will be processed. You will be required to pay the remaining 70% before shipping. Don’t worry, all our payment systems are safe and secure.

 

low profile swimming pool enclosure

A paced swimming pool enclosure ready for shipment

 

We deliver all orders to our customers’ door step. So, there is no need to worry about any logistics involved in the process. Learn how to orders for Excelite swimming pool enclosures.

 

  1. Low profile pool enclosure installation process

Our low profile swimming pool enclosures are easy to install. In fact, they come with an installation manual. Normally, it will take no more than 4 days to complete the process.

 

Residential Swimming Pool Enclosure

Swimming pool enclosure installation

 

Alternatively, you may hire a qualified swimming pool contractor. They can assist in case you don’t know how to go about the installation process. You need to be cautious at this point. That is, adhere to the instructions our installation instructions.

 

  1. Do a final assessment of the new pool enclosure

Test whether the cover slide over each other effortlessly. Make sure none of the sections scratches the polycarbonate sheet. In case it does, then it must be due to poor installation procedure.

 

  1. Enjoy your swimming pool

You can now enjoy an extended swimming season without worrying about the weather condition. Whether it’s winter or summer, your pool will always be protected.

 

Conclusion

Redesigning a low profile swimming pool enclosure is not a difficult process as most people perceive it. Our technicians do the hard tasks for you. That is, fabricating both polycarbonate and aluminum. Your work is to fix the parts, as indicated in our technical manual.

In case you have any questions, don’t hesitate to contact our technical staff.